Loading... Please wait...

Chas Parker Collar. Fits the 4 inch vises like the #104 and Others

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Check these numbers to your vise.
$50.00
Shipping:
Free Shipping

Sorry but this item is currently unavailable. Please check back at a later stage.

 Product Description

Parker Collar that fits a spindle cut out with a minor diameter of 1-7/16. Check the drawing that is in with the images to see if it is a match for your Parker. This collar fits a 49X Parker.

The two legs that rest against the vise will need some adjustment by either sanding or machining, so the collar will be equally supported in three areas. I made the two side legs longer than my examples so they can be fitted properly for your individual vise.  The vise castings are not very precision, and will require some fitting on your part.

Collars are made from a 4140 type steel and should always be greased.

 

Questions?  Contact Kevin:  mountainproduct@gmail.com

Width:                                   2.59   (2-5/8)

Height:                                  1.700  (1-11/16)

Thickness:                               .750  (3/4)

Center of hole to shoulder:         .213  (7/32)

Spindle Minor Diameter:            1.437  (1-7/16)

 

 

 

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Follow us on

Electronic Check Processing