Loading... Please wait...

Holland 13 (3 inch Custom Built Jaws).

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
$65.00 (Fixed shipping cost)

Sorry but this item is currently unavailable. Please check back at a later stage.

 Product Description

This Holland is now in beautiful shape, and would be a perfect size vise for a hobby bench.

The custom made serrated jaws are not original. When I started restoring this vise I saw the jaws were not in very good condition and were cast into the vise. I set the vise up in my CNC Milling machine and removed the old hard face jaws and created a ledge that would support the jaws during work.  I copied the Starrett design.  I will supply a drawing in case these jaws ever need replacing or you want a smooth set down the road.

Next, I focused on making new handles and made the 1-1/8 round knob ends. The handles are made from 1144 Cold Formed CRS, which is practically unbend-able.  It's the best material for handles, in my opinion. The spindle handle is 5/8 inch diameter replacing the 9/16 original handle.  I bored the handle hole .015 oversize for a clean fit.  After I hand made the handle knobs, I peened them in place for a permanent installation, and added a set of bumpers.

I built a 1-1/2 x .145 Aluminum washer to tighten up the backlash.  I reversed the collar which gave a larger gap to make the washer thicker. Aluminum Bronze material is the best material for wear in my opinion, just does not wear the steel spindle or wear in to itself. 

I also adjusted the pin that holds the nut in place.  It used to be a 1/4 inch pin and I replaced it with a 9/32 pin.  It is closer to the nut so that it will tighten up the nut for better backlash.  Looks like 12 to 2 o'clock for a tight backlash, just the way I like them.

Painted with Rust-Oleum Hammered Deep Green.  This Holland 13 is now ready for years of solid service.

Shipping will be through UPS. I am estimating around $65 on this vise. I can get a better quote once I have the new owners address. 

The shipping price is for estimate only.

More questions?  Contact Kevin:  mountainproduct@gmail.com 

Length:                                  14"

Height:                                   7"

Width at widest point:              5-1/2"

Handle Length:                        9"

Top of jaws to square slider:     2-3/4"

Weight:                                  28 lbs

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...


Follow us on

Electronic Check Processing