A pair of new replacement Serrated Vise Jaws for the Starrett #326, 616, 626 and a 926 Vise.

A-2 Tool Steel is Heat Treated to 54-56 Rockwell. The colorful pattern on the serrated jaws happens during the Heat Treating process when nitrogen is used. After Heat Treating, these jaws are surface ground flat and then squared.

(4x)  3/8:16 Short Head Cap Screws supplied.

These are Premium Handcrafted Jaws. Many imports use powdered metal that gets injected into a mold to save time. I have seen many break at the screw holes. My jaws should be the last you ever buy.

Made in the USA.

Questions?  Contact Kevin:  mountainproduct@gmail.com

Length:         6.040             

Width:           1-3/4  Original width is 1.700  (I added a little bit more on the top in case the new owner wanted to form the top side to match the arc in the vise).         

Thickness:       3/4   Original thickness is 11/16 (.688).  I made it a bit thicker to add more beef around the screws and                                   allow the owner to re-surface the face.   

Distance between screws:  4-1/16                 

Screw Size:     3/8:16